PEOPLE AND PLACES: Hydrogen fuel breakthrough as plant waste is converted into gas with 100% efficiency:THE FUTURE OF ELECTRICITY

Hydrogen fuel breakthrough as plant waste is converted into gas with 100% efficiency

Virginia Polytechnic Institute and State University researchers found a way to use discarded corn husks and stalks to make cheap hydrogen fuel
Used efficient method to convert 100% of plant sugars into 'green' fuel
It's previously only been possible to convert 60% of sugars into hydrogen
Breakthrough could see motorists filling up at roadside bioreactors

The days of filling your car with petrol may be numbered because researchers have boosted the efficiency of making hydrogen fuel from plant waste.

US scientists have found a way to use discarded corn husks and stalks to make cheap hydrogen fuel that doesn't pollute the environment like fossil fuels.

The breakthrough could one day see the fuel being produced locally and drivers stopping to refuel their vehicles at roadside bioreactors instead of pumping petrol into their motor.

US scientists have found a way to use discarded corn husks and stalks to make cheap hydrogen fuel that doesn't pollute the environment like fossil fuels and it could accelerate the take up of biogas for cars

Eco-friendly hydrogen cars, which are already a reality, emit only water, but the gas is expensive and is not easy to store, meaning more research is needed for hydrogen cars to become mainstream.

Now, researchers at Virginia Polytechnic Institute and State University have shown that it’s possible to convert 100 per cent of the sugar in corn stalks and husks – a by-product of farming – into hydrogen gas, which can be used to power vehicles.

It’s previously only been possible to convert between 30 and 60 per cent of plant sugar into hydrogen, by using industrial catalysts or fermenting techniques, The Independent reported.

The ultimate aim is to produce large quantities of hydrogen from crop waste efficiently, because many present methods either cost too much or use food crops.

The breakthrough could one day see the fuel being produced locally and drivers stopping to refuel their vehicles at roadside bioreactors instead of pumping petrol into their motor.

... AND COCONUTS COULD BE USED TO STORE HYDROGEN

For years, scientists have been working out how to develop fuel cell cars powered by pure hydrogen, but are unsure how to store the substance effectively.

Now, researchers from India's Benaras Hindu University may be close to solving this problem using coconut kernels to store hydrogen in gas form.

Storing liquid hydrogen is notoriously difficult as it must be held at extremely low temperatures, which is expensive and tricky in the confines of a car.

To store it in its gaseous state, would mean that vehicles would have to be fitted with large, pressurised tanks, which is not practical.

So instead, experts have focused on finding materials, such as carbon, which can absorb hydrogen and release it on demand.

Professor Viney Dixit and his team, at the university’s Hydrogen Energy Centre created carbon from coconut kernels, which contain fatty and organic acids as well as potassium, magnesium and sodium.

He says that the kernels, which are easily found, are cheap and can easily be converted into carbon.

‘Unlike graphene, Carbon nano tubes (CNTs) and other type of carbons, the production of carbon from solid endosperm is not time taking, he wrote in a research paper.

‘Therefore, its cost-effectiveness, good adsorption capacity and easy availability are its advantageous factors in regard to hydrogen storage.’

The researchers found that the carbon produced from the kernels could store a ‘considerable’ amount of hydrogen.

Two scientists developed a process to make more efficient fuel by mixing biomass with a special solution comprising 10 enzymes that turn plant sugars into hydrogen and carbon dioxide.

The enzymes were created in microbial fermenters using genetically engineered bacteria, which were then added to the plant waste and left for several weeks – although they would be left for far longer if the fuel was produced on a large scale.

The breakthrough could produce a zero-emissions fuel that could speed up the movement toward hydrogen-powered vehicles, according to the study, which was published in the journal PNAS.

‘We have demonstrated the most important step toward a hydrogen economy -- producing distributed and affordable green hydrogen from local biomass resources,’ said study co-author Percival Zhang, a professor at Virginia Tech.

Together with former doctoral student Joe Rollin, he founded a start-up called Cell-free Bioinnovations to work on the fuel.

The process builds on previous research using xylose, ‘the most abundant simple plant pentose sugar, to produce hydrogen yields that previously were attainable only in theory,’ according to the study.

Other hydrogen fuel production methods rely on highly processed sugars, but the Virginia Tech team used corn husks and stalks, which are known as dirty biomass, to cut costs and make the fuel easier to produce locally.

Dr Rollin found that the process of breaking down corn husks and stalks into hydrogen and carbon dioxide can use both sugars glucose and xylose at the same time - not one after the other.

The discovery means it is possible to speed up the rate at which hydrogen is released, while decreasing the area of the facility needed to produce it to the size of a gas station.

Other hydrogen fuel production methods rely on highly processed sugars, but the Virginia Tech team used corn husks and stalks, (a stock image of the whole plantis shown) which are known as dirty biomass, to cut costs and make the fuel easier to produce locally

‘We believe this exciting technology has the potential to enable the widespread use of hydrogen fuel cell vehicles around the world and displace fossil fuels,’ Dr Rollin said.

Experts say it is hard to know how much the new approach might cost, but Lonnie Ingram, director of the Florida Centre for Renewable Chemicals and Fuels at the University of Florida - who was not involved with the study - said the work ‘represents a revolutionary approach that offers many new advantages.

‘These researchers have certainly broadened the scope of our thinking about metabolism and how it plays into the future of alternative energy production,’ he said.

Researchers say they have the necessary cash to scale up their findings to a demonstration-level, which is the next step of the project.

Professor Zhang said: ‘I think in three to five years we should be able to build a bioreactor that is something like a gas station which can produce 200 kilos of hydrogen fuel a day.

‘This would be enough to re-fuel about 40 or 50 cars.’

Spray-on cells can turn ANYTHING into a solar panel: Breakthrough technology offers a cheap way to harness the sun's energy

Scientists from Sheffield have developed low-cost, spray-on solar cells
They are applied to surfaces in a similar way to paint or graphic printing
The spray-on cells are made perovskite that produces very little waste
They can be easily mass produced, meaning manufacturing costs are low

Forget large, bulky solar panels. Soon anything from clothing to cars could be used to harness energy from the sun.

Scientists from Sheffield have developed low-cost, spray-on solar cells that can be applied to surfaces in a similar way to paint.

The cells are made of a material called perovskite, which is cheap to produce and, when used as a spray, produces very little waste.

Scientists from Sheffield have developed low-cost, spray-on solar cells that can be applied to small surfaces (pictured) in a similar way to paint. The cells are made of a material called perovskite, which is cheap to produce and, when used as a spray, produces very little waste

This, along with the fact the spray can be easily mass produced, means manufacturing costs are low, which ultimately means prices would be lower for customers.

In theory, the spray could be used on any surface that the cells can stick to, however, its efficiency is likely to be affected on flexible surfaces, or fabrics.

SOLAR PANEL EFFICIENCY

Around 85 per cent of photovoltaics currently used are made from crystalline silicon.

It is expensive to produce and typically has a conversion rate of 25 per cent, on average.

The material used in the spray-on cells is perovskite.

Perovskite is a term used to describe the mineral crystal structure found in the calcium titanium oxide mineral species, made of calcium titanate.

It was first used for solar cells in 2009, but efficiency was poor.

Oxford researchers then used polymers to make solid cells, which were eventually engineered to efficiencies of 16 per cent.

Efficient organometal halide perovskite-based photovoltaics were demonstrated in 2012.

The Sheffield team found that by spray-painting the perovskite they could make prototype solar cells with efficiency of up to 11 per cent.

Around 85 per cent of photovoltaics currently used are made from crystalline silicon, which has a conversion rate of 25 per cent, on average.

Perovskite is a term used to describe the mineral crystal structure found in the calcium titanium oxide mineral species, made of calcium titanate.

It was first used for solar cells in 2009, but efficiency was low. Oxford researchers then used polymers to make solid cells, which were eventually engineered to efficiencies of 16 per cent.

The team of scientists from the University of Sheffield is the first to make perovskite solar cells using this spray painting technique.

Experts from the University’s Department of Physics and Astronomy and Department of Chemical and Biological Engineering previously used the method to produce solar cells using organic semiconductors - but using perovskite is considered a major step forward.

Efficient organometal halide perovskite-based photovoltaics were first demonstrated in 2012.

They are now a promising new material for solar cells because they combine high efficiency with low materials costs.

Around 85 per cent of photovoltaics currently used are made from crystalline silicon (stock image pictured). It is expensive to produce and typically has a conversion rate of around 25 per cent. The material used in Sheffield University's spray-on cells is called perovskite

Perovskite is a term used to describe the mineral crystal structure found in the calcium titanium oxide mineral species, made of calcium titanate. The team of Sheffield scientists is the first to make perovskite solar cells using this spray-painting process. Spray nozzle and head pictured

Lead researcher Professor David Lidzey said: ‘There is a lot of excitement around perovskite-based photovoltaics.

‘Remarkably, this class of material offers the potential to combine the high performance of mature solar cell technologies with the low embedded energy costs of production of organic photovoltaics.’

While most solar cells are manufactured using energy intensive materials, perovskites, by comparison, require much less energy to make.

By spray-painting the perovskite layer in the air, the team hope the overall energy used to make a solar cell can be reduced further.

Professor Lidzey added: ‘The best certified efficiencies from organic solar cells are around 10 per cent.

The Sheffield team found that by spray painting the perovskite, (illustration pictured) they could make prototype solar cells with efficiency of up to 11 per cent. Perovskite cells, in general, have efficiencies of up to approximately 19 per cent

‘Perovskite cells now have efficiencies of up to 19 per cent. This is not so far behind that of silicon at 25 per cent - the material that dominates the worldwide solar market.’

He added: ‘The perovskite devices we have created still use similar structures to organic cells. What we have done is replace the key light absorbing layer - the organic layer - with a spray-painted perovskite.

‘Using a perovskite absorber instead of an organic absorber gives a significant boost in terms of efficiency.’

The Sheffield team found that by spray-painting the perovskite they could make prototype solar cells with efficiency of up to 11 per cent.

Professor Lidzey said: ‘This study is a significant step towards efficient, low-cost solar cell devices made using high volume roll-to-roll processing methods.

‘I believe that new thin-film photovoltaic technologies are going to have an important role to play in driving the uptake of solar-energy, and that perovskite based cells are emerging as likely thin-film candidates.'

In the past year solar power in the UK has more than doubled while in the US it has grown by 30 per cent.

But many current systems fail to solve the problem of how energy is managed and used overnight when the sun sets.

Traditionally, energy gathered during the day is sent back to the grid, but this can prove costly if you need to buy it back - unless you have a smart battery that stores the excess energy in your home.

Sonnenspeicher (pictured) uses a lithium iron phosphate battery to store energy harnessed by solar panels. This energy can be used throughout the day, and any excess is stored for when the sun goes down. Rather than selling this excess electricity back to the grid, homeowners can then use their stored supply for power

With this in mind, German firm Automatic Storage Device (ASD) and designer Wolfram Walter have created the Sonnenspeicher.

It uses a lithium iron phosphate battery to store the energy harvested during the day by solar panels fitted to a roof.

This energy is used throughout the day, and any excess is stored for when the sun goes down.

Rather than selling this excess electricity to the grid, and potentially having to buy it back at a later date or time, homeowners can use this stored supply to power their home until the sun rises again.

Sonnenspeicher features an intelligent management system that automatically controls the charging and discharging current, to make it easier to manage how much energy is being used.

Sonnenspeicher features an intelligent management system that automatically controls the charging and discharging current, to make it easier to manage how much energy is being used. It additionally has a Sleep mode that ensures the storage system never runs low and will automatically go into standby when not in use

Although it is designed to be completely independent of the national power grid, it can equally be wired up in the case of emergency. For example, whenever there is energy in the battery available, the connection to the grid is locked. When this energy runs out, the Sonnenspeicher connects to the grid 'in a millisecond'

HOW SONNESPEICHER WORKS

ASD Sonnenspeicher uses a lithium iron phosphate battery to store the energy harvested during the day by solar panels.

This energy is used throughout the day, and any excess is stored for when the sun sets.

Sonnenspeicher features an intelligent management system that automatically controls the charging and discharging current, to make it easier to manage how much energy is being used.

It additionally has a Sleep mode that ensures that the storage system never runs low and will automatically go into standby when its not being used to increase efficiency.

The system comes in different sizes ranging from the Sonnenspeicher 300, which is 4.8 kWh, to the Sonnenspeicher 600 at 8.06 kWh up to the 1000 model which offers 13.44 kWh.

Prices start at €8,450 (£6,170).

It additionally has a Sleep mode that ensures the storage system never runs low, and will automatically go into standby when its not being used to increase efficiency.

And although it is designed to be completely independent of the national power grid, it can equally be wired up in the case of emergency.

For example, whenever there is energy in the battery available, the connection to the grid is locked.

When this energy runs out, the Sonnenspeicher connects to the grid 'in a millisecond'.

This switchover works the other way too.

If a home is predominantly powered by the grid, the Sonnenspeicher will still store energy and instead act like a generator during a power cut.

'We wanted to create a storage system that makes you truly independent of the national power grid, that adequately supplies all of your household appliances at all times, and that remains efficient and trouble-free for at least 20 years, so that you can have the peace of mind that your investment really is worth every penny,' said the firm.

The system comes in different sizes ranging from the Sonnenspeicher 300, which is 4.8 kWh, to the Sonnenspeicher 600 at 8.06 kWh up to the 1000 model which offers 13.44 kWh.

Prices start at €8,450 (£6,170).

The firm said an average home can save around €1,200 a year (£876), so it would still take around seven years to recoup the costs, but the system will last for 20 years.

How your windows could be the future of electricity: Scientists create transparent solar panels out of 'glass-like' plastic

One of the occasional complaints around solar panels is that they are 'an eyesore'.

Well this may be about to change, after researchers developed a new transparent solar cell which means windows in homes and other buildings can have the ability to generate electricity while still allowing people to see outside.

The University of California, Los Angeles team describes a new kind of polymer solar cell (PSC) that produces energy by absorbing mainly infrared light, making the cells nearly 70 per cent transparent to the human eye.

They made the device from a photo-active plastic that converts infrared light into an electrical current.

Power you can see through: The UCLA team have made solar panels that are almost transparent

'These results open the potential for visibly transparent polymer solar cells as add-on components of portable electronics, smart windows and building-integrated photovoltaics and in other applications,' said study leader Yang Yang, a UCLA professor of materials science and engineering.

Yang added that there has been intense world-wide interest in so-called polymer solar cells.

'Our new PSCs are made from plastic-like materials and are lightweight and flexible,' he said. 'More importantly, they can be produced in high volume at low cost.'
Polymer solar cells have attracted great attention due to their advantages over competing solar cell technologies.

Scientists have also been intensely investigating PSCs for their potential in making unique advances for broader applications. Several such applications would be enabled by high-performance visibly transparent photovoltaic (PV) devices, including building-integrated photovoltaics and integrated PV chargers for portable electronics.

More obvious: Solar panels being fitted to a roof in Totnes Devon, England

Previously, many attempts have been made toward demonstrating visibly transparent or semitransparent PSCs.

However, these demonstrations often result in low visible light transparency and/or low device efficiency because suitable polymeric PV materials and efficient transparent conductors were not well deployed in device design and fabrication.
A team of UCLA researchers from the California NanoSystems Institute, the UCLA Henry Samueli School of Engineering and Applied Science and UCLA's Department of Chemistry and Biochemistry have demonstrated high-performance, solution-processed, visibly transparent polymer solar cells through the incorporation of near-infrared light-sensitive polymer and using silver nanowire composite films as the top transparent electrode.

The near-infrared photoactive polymer absorbs more near-infrared light but is less sensitive to visible light, balancing solar cell performance and transparency in the visible wavelength region.
Another breakthrough is the transparent conductor made of a mixture of silver nanowire and titanium dioxide nanoparticles, which was able to replace the opaque metal electrode used in the past. This composite electrode also allows the solar cells to be fabricated economically by solution processing.

With this combination, 4 per cent power-conversion efficiency for solution-processed and visibly transparent polymer solar cells has been achieved.

'We are excited by this new invention on transparent solar cells, which applied our recent advances in transparent conducting windows (also published in ACS Nano) to fabricate these devices,' said Paul S.Weiss, CNSI director and Fred Kavli Chair in NanoSystems Sciences.

A new process that simultaneously combines the light and heat of solar radiation to generate electricity could offer more than double the efficiency of existing solar cell technology, say the Stanford engineers who discovered it and proved that it works. The process, called "photon enhanced thermionic emission," or PETE, could reduce the costs of solar energy production enough for it to compete with oil as an energy source.Assistant Professor Nick Melosh in his Stanford Lab describes how the system works.

Stanford engineers have figured out how to simultaneously use the light and heat of the sun to generate electricity in a way that could make solar power production more than twice as efficient as existing methods and potentially cheap enough to compete with oil.

Unlike photovoltaic technology currently used in solar panels – which becomes less efficient as the temperature rises – the new process excels at higher temperatures.

Called "photon enhanced thermionic emission," or PETE, the process promises to surpass the efficiency of existing photovoltaic and thermal conversion technologies.

"This is really a conceptual breakthrough, a new energy conversion process, not just a new material or a slightly different tweak," said Nick Melosh, an assistant professor of materials science and engineering, who led the research group. "It is actually something fundamentally different about how you can harvest energy."

And the materials needed to build a device to make the process work are cheap and easily available, meaning the power that comes from it will be affordable.

Melosh is senior author of a paper describing the tests the researchers conducted. It was published online Aug. 1 in Nature Materials.

"Just demonstrating that the process worked was a big deal," Melosh said. "And we showed this physical mechanism does exist; it works as advertised."

Most photovoltaic cells, such as those used in rooftop solar panels, use the semiconducting material silicon to convert the energy from photons of light to electricity. But the cells can only use a portion of the light spectrum, with the rest just generating heat.

This heat from unused sunlight and inefficiencies in the cells themselves account for a loss of more than 50 percent of the initial solar energy reaching the cell.

L.A. Cicero
Nick Melosh, assistant professor of materials science and engineering, stands beside the ultra-high vacuum chamber used in the tests that proved the PETE process works.
If this wasted heat energy could somehow be harvested, solar cells could be much more efficient. The problem has been that high temperatures are necessary to power heat-based conversion systems, yet solar cell efficiency rapidly decreases at higher temperatures.
Until now, no one had come up with a way to wed thermal and solar cell conversion technologies.
Melosh's group figured out that by coating a piece of semiconducting material with a thin layer of the metal cesium, it made the material able to use both light and heat to generate electricity.
"What we've demonstrated is a new physical process that is not based on standard photovoltaic mechanisms, but can give you a photovoltaic-like response at very high temperatures," Melosh said. "In fact, it works better at higher temperatures. The higher the better."
While most silicon solar cells have been rendered inert by the time the temperature reaches 100 degrees Celsius, the PETE device doesn't hit peak efficiency until it is well over 200 C.
Because PETE performs best at temperatures well in excess of what a rooftop solar panel would reach, the devices will work best in solar concentrators such as parabolic dishes, which can get as hot as 800 C. Dishes are used in large solar farms similar to those proposed for the Mojave Desert in Southern California and usually include a thermal conversion mechanism as part of their design, which offers another opportunity for PETE to help generate electricity as well as minimize costs by meshing with existing technology.
Courtesy of Nick Melosh

A small PETE device made with cesium-coated gallium nitride glows while being tested inside an ultra-high vacuum chamber. The tests proved that the process simultaneously converted light and heat energy into electrical current.
"The light would come in and hit our PETE device first, where we would take advantage of both the incident light and the heat that it produces, and then we would dump the waste heat to their existing thermal conversion systems," Melosh said. "So the PETE process has two really big benefits in energy production over normal technology."
Photovoltaic systems never get hot enough for their waste heat to be useful in thermal energy conversion, but the high temperatures at which PETE performs are perfect for generating usable high-temperature waste heat. Melosh calculates the PETE process can get to 50 percent efficiency or more under solar concentration, but if combined with a thermal conversion cycle, could reach 55 or even 60 percent – almost triple the efficiency of existing systems.
The team would like to design the devices so they could be easily bolted on to existing systems, thereby making conversion relatively inexpensive.
The researchers used a gallium nitride semiconductor in the "proof of concept" tests. The efficiency they achieved in their testing was well below what they have calculated PETE's potential efficiency to be – which they had anticipated. But they used gallium nitride because it was the only material that had shown indications of being able to withstand the high temperature range they were interested in and still have the PETE process occur.
With the right material – most likely a semiconductor such as gallium arsenide, which is used in a host of common household electronics – the actual efficiency of the process could reach up to the 50 or 60 percent the researchers have calculated. They are already exploring other materials that might work.
Another advantage of the PETE system is that by using it in solar concentrators, the amount of semiconductor material needed for a device is quite small.
"For each device, we are figuring something like a 6-inch wafer of actual material is all that is needed," Melosh said. "So the material cost in this is not really an issue for us, unlike the way it is for large solar panels of silicon."
The cost of materials has been one of the limiting factors in the development of the solar power industry, so reducing the amount of investment capital needed to build a solar farm is a big advance.
"The PETE process could really give the feasibility of solar power a big boost," Melosh said. "Even if we don't achieve perfect efficiency, let's say we give a 10 percent boost to the efficiency of solar conversion, going from 20 percent efficiency to 30 percent, that is still a 50 percent increase overall."
And that is still a big enough increase that it could make solar energy competitive with oil.
The research was largely funded by the Global Climate and Energy Project at Stanford and the Stanford Institute for Materials and Energy Science, which is a joint venture of Stanford and SLAC National Accelerator Laboratory, with additional support from the Department of Energy and the Defense Advanced Research Projects Agency.

World's largest solar-powered yacht stops in Brisbane during round-the-world voyage

The first solar powered vessel to travel all the way around the world has crossed the finish line - circumnavigating the globe in a journey that has taken since September 2010.

MS Turanor PlanetSolar, crossed the finish line of its trip around the world at the Hercule Harbour in Monaco.

PlanetSolar is the biggest solar boat catamaran in the world, with its 537 square meters of photovoltaic panel power - backed up with six huge blocks of lithium-ion rechargeable batteries to keep it going when the sun didn't shine.

Team members of PlanetSolar wave with flares as they achieve the first around-the-world tour with only solar energy in Monaco

PlanetSolar crosses the finish line of its trip around the world at the Hercule Harbour in Monaco

France's Erwann Le Rouzic, left, captain of MS Turanor PlanetSolar and Swiss Raphael Domjan, right, initiator and expedition leader of PlanetSolar catamaran

The boat began it's voyage on September 27, 2010, in Monaco and stops have included Miami, Cancun - during the United Nations World Climate Conference - and the Galapagos Islands in the Pacific Ocean.

It cost 12.5million euros to build. The name Tûranor, derived from J.R.R. Tolkien's novel The Lord of the Rings, translates to 'The Power of the Sun'.

The boat is covered in more than 500 square meters of solar panels, which power the two electric motors in each hull. The shape of the boat means that it will be able to reach speeds of up to fourteen knots.

The boat's hull has been model tested in wind tunnels and has been tank tested to determine the hydrodynamics and aerodynamics of the hull.

This 31m long boat - which can hold 40 passengers - has been designed to be used as a luxury yacht after the record attempt is finished.

The Turanor Planetsolar ship arrives in the port of Monaco after completing the first around-the-world trip using solar energy

It has taken since September 2010 to complete the global circumnavigation for this hi-tech vessel to demonstrate the potential of solar energy

The Turanor PlanetSolar is the world's shows the world's largest solar boat. The company claims it will be the first fully solar-powered vessel to circumnavigate around the world.

It looks like the world's smallest aircraft carrier as dreamed up by a child with an oversized Lego set and an imagination to match.

But this vessel is in fact the largest solar-powered boat in the world.

Tûranor PlanetSolar is currently on a voyage to set a round-the-world record - and promote the use of sustainable energy. In doing so it would be the first fully solar-powered vessel to circumnavigate the globe.

These images were taken as it arrived on its first Australian stopover in Brisbane.

The Turanor PlanetSolar is the world's shows the world's largest solar boat. The company claims it will be the first fully solar-powered vessel to circumnavigate around the world.

Britain's biggest solar farm launches with 30 acres of panels to provide power for 1,000 homes

Huge five-acre farm has 5.6 miles of frames and 1800 panels
'Less intrusive' than wind farms
Huge farm to provide power for just 1,000 homes

The UK’s largest solar farm has opened and will produce enough electricity to power 1,000 homes - even although the black panels will stretch across miles of farmland.

Energy industry leaders gathered to see the project, which is made of 1,800 solar PV panels mounted on 5.6 miles of frames, unveiled for the first time.

Locals claim it is less of a blot on the landscape than wind farms, because the panels are completely surrounded by trees.

The five mega watt scheme spans across a huge 30 acres on the Cadland estate in Fawley near Southampton, Hants.

Switched on: The five mega watt scheme spans 30 acres

Enlarge

Fingers crossed its stays hot: Project Manager, Scott Hotgartner at Cadland Solar Farm, in Hampshire - the farm will produce enough electricity for 1,000 homes

‘I was very impressed when I saw the solar farm, it’s much bigger than I imagined but is amazingly discreet.I would take one of these solar farms over a wind turbine farm any day, because they are silent and not intrusive at all,' says Councillor McElvoy

The estate is used as well for farming wheat, maize, potatoes and some livestock.

Local councillor Alexis McEvoy, chairman of the New Forest District Council, cut the ribbon for the installation before giving guests a guided tour.

The opening was hosted by Aldred Drummond, owner of the Cadland Estate who commissioned the build.

Mr Drummond said: ‘I think the project is universally regarded as a very positive scheme.

‘I do believe this is a ground-breaking project and I’m glad that we, as a farm, are embracing the use of solar power and alternative energy uses.

‘I’m excited by the installation of the solar farm and also for the future of renewable energy.’

Adrian Pike, CEO of national energy efficiency solutions company Anesco, helped Drummond host the event.

Looking into the future? Energy industry leaders gathered to see the project, which is made of 1,800 solar PV panels mounted on 5.6 miles of frames

He said: ‘We’ve had to push quite hard to make this project happen and we could not have wished for it to have gone any better.

‘We were the fifth company Aldred approached and we’re just glad we’ve been able to get this project moving.

‘When we turned up at the farm to see the finished thing for the first time, we just went ‘wow’ - we were all in awe.

‘Some companies make these kind of projects too complex, but we have worked well with Aldred because we have kept things simple.’

Cllr McEvoy added: ‘I was very impressed when I saw the solar farm, it’s much bigger than I imagined but is amazingly discreet.

‘I would take one of these solar farms over a wind turbine farm any day, because they are silent and not intrusive at all.

‘I think everyone was expecting it to be a blot on the landscape but I’ve not had one complaint about it, it’s completey surrounded by trees.

‘Aldred Drummond deserves a lot of credit for this project as farms are not having an easy time at the moment - I hope it’s a success

'Beams' from space that could power cities: First tests on solar satellites offer hope of green energy that might actually WORK

Floating solar panels 'beam' energy to Earth using lasers or microwaves
Equipment tested in space to deploy 'swarm' of solar panels
Initially will supply power to disaster areas or outlying regions
Eventually 'swarm' of tiny satellites could power cities

On Earth, solar power has had a slow start, thanks to high prices and inefficient panels - but the first tests on 'solar satellites' offer hope of 'green energy' that actually works.
Researchers at Stratchclyde University have already tested equipment in space, a first step for solar panels to collect energy and transfer it back to earth through microwaves or lasers.

The researchers aim to produce a 'swarm' of satellites that could one day power whole cities.

Initially, the tiny satellites wouldn't replace ordinary power grids - instead, they could swiftly resupply power to disaster areas or outlying districts that are difficult to reach

Solar satellite: The researchers aim to produce a 'swarm' of satellites that could one day power whole cities

Dr Massimiliano Vasile, of Strathclyde¿s Department of Mechanical and Aerospace Engineering, is leading the research

Initially the tiny satellites wouldn't replace ordinary power grids - instead, they could swiftly resupply power to disaster areas or outlying districts that are difficult to reach.

A 'receiver' on Earth would turn the precisely targeted microwave or laser beams into usable electricity.

The idea of solar panels in space has been much discussed - but the new research proves that at least a small-scale version IS possible.

Dr Massimiliano Vasile, of the University of Strathclyde’s Department of Mechanical and Aerospace Engineering, who is leading the space based solar power research, said: ‘Space provides a fantastic source for collecting solar power and we have the advantage of being able to gather it regardless of the time of the day or indeed the weather conditions.
‘In areas like the Sahara desert where quality solar power can be captured, it becomes very difficult to transport this energy to areas where it can be used.

'However, our research is focusing on how we can remove this obstacle and use space based solar power to target difficult to reach areas.

‘By using either microwaves or lasers we would be able to beam the energy back down to earth, directly to specific areas.

'This would provide a reliable, quality source of energy and would remove the need for storing energy coming from renewable sources on ground as it would provide a constant delivery of solar energy.
‘Initially, smaller satellites will be able to generate enough energy for a small village but we have the aim, and indeed the technology available, to one day put a large enough structure in space that could gather energy that would be capable of powering a large city.’
Last month, a team of science and engineering students at Strathclyde developed an innovative ‘space web’ experiment which was carried on a rocket from the Arctic Circle to the edge of space.

The researchers already deployed a network of satellites which could be used to 'beam' power back to Earth

The experiment, known as Suaineadh – or ‘twisting’ in Scots Gaelic, was an important step forward in space construction design and demonstrated that larger structures could be built on top of a light-weight spinning web, paving the way for the next stage in the solar power project.
Dr Vasile added: ‘The success of Suaineadh allows us to move forward with the next stage of our project which involves looking at the reflectors needed to collect the solar power.
‘The current project, called SAM (Self-inflating Adaptable Membrane) will test the deployment of an ultra light cellular structure that can change shape once deployed. The structure is made of cells that are self-inflating in vacuum and can change their volume independently through nanopumps.
‘The structure replicates the natural cellular structure that exists in all living things. The independent control of the cells would allow us to morph the structure into a solar concentrator to collect the sunlight and project it on solar arrays. The same structure can be used to build large space systems by assembling thousands of small individual units.’
The project is part of a NASA Institute for Advanced Concepts (NIAC) study led by Dr John Mankins of Artemis Innovation. The University of Strathclyde represents the European section of an international consortium involving American researchers, and a Japanese team, led by Professor Nobuyuki Kaya of the University of Kobe, a world leader in wireless power transmission.
The NIAC study is demonstrating a new conceptual design for large scale solar power satellites. The role of the team at the University of Strathclyde is to develop innovative solutions for the structural elements and new solutions for orbit and orbit control.

Revolutionary solar tunnel powers Europe's first 'green' high-speed trains

High-speed international trains linking Paris and Amsterdam set off this week powered by electricity from a ground-breaking solar tunnel.

The 2.2mile long tunnel crossing Antwerp in Belgium is fitted with 16,000 solar panels covering 50,000 square metres, roughly eight football pitches.

The panels produce 3.3MWh of electricity a year, which will be enough to power 4,000 trains.

Green energy: 16,000 solar panels line the tunnel in Antwerp, Belgium

Enfinity, the U.S based company which developed the project, said it would decrease CO2 emissions by 2,400 tons per year.

'By using electricity generated on-site, we eliminate energy losses and transport costs,' said Steven De Tollenaere from Enfinity.

The first 'green train' left Antwerp on Monday for the Dutch border, filled with the usual commuters and students.

Most were unaware that for the first dozen miles or so, the train's engines were plugged into the solar energy source fitted along the line.

The electricity produced feeds into the line's infrastructure, for lighting, signals and in-train power points, said Frederic Sacre, spokesman for Infrabel, which runs the rail network.

The company hopes the project, which cost £12m, will be extended to the U.S. However, there are no plans to introduce the solar infrastructure in the UK as recent cuts to financial incentives have made such projects unviable.

Bart van Renerghem from Enfinity, told Sky News: 'Apparently the UK Government is more concerned about the Treasury than the mid and long-term carbon reduction objectives that we have. Personally, I think it is short-sighted.'

The Toranor PlanetSolar yacht arrives on its first Australian stopover at Riverside Centre Pontoon, Brisbane, today

PLANETSOLAR: THE FACTS

Displacement: 85 metric tons

Length: 31m (35m with panels)

Beam: 15m (23m with panels)

Max speed: 14 knots (26 km/h)

Cruising speed: 7.5 knots (14 km/h)

Crew: Six

Surface area of solar panels: 537sq m

It cost 12.5million euros to build. The name Tûranor, derived from J.R.R. Tolkien's novel The Lord of the Rings, translates to 'The Power of the Sun'.

The boat is covered in more than 500 square meters of solar panels, which power the two electric motors in each hull. The shape of the boat means that it will be able to reach speeds of up to fourteen knots.

The boat's hull has been model tested in wind tunnels and has been tank tested to determine the hydrodynamics and aerodynamics of the hull.

This 31m long boat - which can hold 40 passengers - has been designed to be used as a luxury yacht after the record attempt is finished. This 31m long boat will be turned into a luxury yacht after the record attempt is finished and (right) a regular catamaran in full sail using regular, old-fashioned wind to power it along. A large crowd turned out to see the boat as it arrived in Brisbane

Britain's biggest solar farm launches with 30 acres of panels to provide power for 1,000 homes

Huge five-acre farm has 5.6 miles of frames and 1800 panels
'Less intrusive' than wind farms
Huge farm to provide power for just 1,000 homes